QUICK SETUP GUIDE G10-280L Http://www.a4tech.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
1. Pull out the 10-Link Nano-receiver from bottom of 2. Plug 10-Link Nano-receiver into USB port of your computer or notebook. mouse. 3. Push down battery cover and insert the supplied batteries, making sure that the positive (+) and negative (-) ends of the batteries match the polarity indicators inside the battery compartment of the mouse.
1. Slide on the power switch to turn on the mouse. 2. To turn off the mouse, just slide off the power switch and then LED light is off immediately. The wireless mouse is plug-and-play. No driver is required. If you would like to get more function, please install the software (enclosed on the CD) first. Software Installation 1. Before installing the mouse software, please uninstall any previously installed mouse software. 2. Insert enclosed CD to start installation. 3.
Start—Programs—A4TECH Software—G10 Full-Play---G10 Full-Play, then the icon will appear in the taskbar at the right corner of your screen. Software Instruction A “Mode Management“ Refer to software interface as below, click “Mode Management“, there are five preset modes: Office, Presenter, Multimedia, HTPC, Gaming in mode management. For de-selecting mode, un-tick from bottom to top one by one; for adding, tick conversely.
Mode 2: Meeting/Teaching (Illustration Of Button Function) Illustration of Multi-Mouse&KBs meeting Control Multi-Mouse&KBs Download New Settings 10-Link New Mice/KBs ID Pairing 10-Link Meeting Management -5-
B 10-Link Meeting Management 1. Open 10-Link Meeting Management, click 【New Mice/KBs ID Pairing】to add new mice/KBs. One 10-Link receiver allows to link up to 5 sets mice & KBs to the same computer with defined name and provides the best sharing of meeting to consolidate all member intelligences. 2. Click 【10-Link Meeting Management】and refer to the text on pop-up window to know clearly on how to operate.
3. 5-color LinePointer: Press defined LinePointer button to draw a line or a circle to remark vital points. Each mouse lines with an exclusive color, double click to delete the line, and triple click to delete all lines. LinePointer is obviously more excellent than just a flash of LaserPointer, highly improve efficiency of meeting/teaching.
Troubleshooting If the mouse is not working: 1. Make sure the mouse is on. 2. Check battery and battery installation. 3. Check receiver installation. 4. Try another USB port. Product Support Need help with technical support? Please go to: http://www.a4tech.com/ennew/support.asp and our support team will respond within 72 hours. **Features and specifications of all A4 TECH products are subject to change without notification.