User Manual Tel: 888-404-2337 Add: 710 W. Jefferson St.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules.
Safety Information Please read the following safety guidelines. Nonobservance of these guidelines may cause danger or violation of law.
Product Inspection Installation Steps Please unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer. Items User UserManual Manual Radio Microphone Microphone Hanger and Screws Power Cord Fuse Mounting Bracket Kit User Manual Basic Instructions • The radio operates with cathode-grounded power supply of 13.6V ± 15% only. Please check polarity and voltage of the power supply on the vehicle before you install the radio.
NO. Part Name 1 Mounting Bracket 2 4.8 * 20 mm Self-tapping Screws 3 Locking Knobs 4 Radio Unit 5 RF Antenna Connector 6 Power Inlet 7 GPS Antenna Connector 8 Black Power Cord Front Panel NO. 1 2 3 4 5 6 7 Part Name NO.
Status Indicators Operation Mode Icons LCD Icons Icon Name Status lcons Icon Name Icon Radio Status More bars indicate better signal strength New message/unread message Message Icons InBox is full Scanning is in progress Scanning pauses on a non-priority channel Scan Icons 08 1 Scanning pauses on Priority Channel 1 2 Scanning pauses on Priority Channel 2 L Low TX power for the current channel H High TX power for the current channel Monitor Icon The Monitor feature is active Speaker Ico
Programmable Keys For enhanced convenience, you may request your dealer to program the keys P1, P2, P3, and P4 and as shortcuts to the functions listed below: No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Adjust Squelch Level 14 15 16 17 18 19 20 21 22 One Touch Call 1 One Touch Call 2 One Touch Call 3 One Touch Call 4 One Touch Call 5 Squelch Off Momentary Squelch Off Monitor Talk Around 23 Home Screen 24 Note: 1 Long and short press of a key can be assigned with different functions.
Private Call Group Call Transmitting a Private Call Transmitting a Group Call You may transmit a Private Call through any of the following methods. When transmitting a Private Call, the icon will appear. • Transmitting a call to the preset contact In the home screen, hold down the PTT key on the palm microphone to transmit a Private Call to the Private Call contact preset for the current channel. Note: Your dealer may preset a contact for each digital channel.
Menu Navigation Deleting a Contact You can delete a Private Call contact. However, please note that you can not delete the contact when there is only one entry left in the list. In addition, the Private Call contact preset on the currently used channel cannot be deleted. Main Menu New Contact Contact Message Call Logs Zone Scan Settings Notify Accessories(Optional) You can add a Private Call contact to the contact list.
Quick Text Under this option there are some text messages (10 entries at most) preset by your dealer. You can choose to edit and send any entry. OutBox Scan To access this item, press the Menu key in the home screen and then select “Scan”. The OutBox can save up to 10 sent messages. When the OutBox is full, the earliest message will be overwritten by the latest one automatically. For each message, you can choose to perform any of these operations: Resend, Forward, View Details and Delete.
Zone To access this item, press the Menu key in the home screen and then select “Zone”. This radio supports up to 64 zones. You can use this menu to select your desired zone. Settings To access this item, press the Menu key in the home screen and then select “Settings”. Radio Settings You can optimize your radio performance by customizing related parameters according to actual needs and your preferences. Language To set the language in which all interface information is displayed.
Gain Level The range of “Gain Level” is Level 1 to Level 9. The lower the Gain Level is, the easier the VOX to be enabled. Radio Password Options: Off/ On When“ On”is selected,users have to input the correct Radio Lock Password to operate the radio normally.When“ Off”is selected,users can operate the radio without inputting the password. Radio Info With this option, you can view basic information of your radio, including Serial Number, Radio Alias, Frequency Range and Firmware Version, etc.
Squelch Off Time-out Timer (TOT) If the feature “Squelch Off” is enabled, the speaker will keep unmuted no matter whether carrier is present. The purpose of TOT is to prevent any user from occupying a channel for an extended period. If the preset time expires, the radio will automatically terminate transmission and keep beeping. To stop beeping, please release the PTT key. You must wait for a certain time period (preset by your dealer) to initiate another transmission.
Troubleshooting Phenomena The radio can not be powered on. During receiving signals, the voice is weak, discontinuous or totally inactive. You can not communicate with other members in Analog mode. You can not communicate with other members in Digital mode although there is receiving indication. Irrelevant communications or noises are heard on the analog channel. The noise is too loud. 24 Analysis Phenomena Analysis Solution The power cord may be unconnected. Connect the power cord correctly.