Department 9CD 3.0 – User manual Version 1.00 Internal 1 (7) User manual 9CD 3.0 Version V1.00 Date Author Description 1.10.2020 Sko First version Idesco Oy | Teknologiantie 9, FIN-90590 OULU | Tel +358 20 743 4175 | info@idesco.fi | www.idesco.
Department 9CD 3.0 – User manual Version 1.00 Internal 2 (7) Contents 1. Introduction .................................................................................................................................. 3 2. Technical Specification ................................................................................................................. 3 2.1. 2.2. 2.3. 2.4. 2.5. 2.1. 2.2. 2.3. 2.4. 3. Operating voltage, power, electrical interfaces..............................................
Department 9CD 3.0 – User manual Version 1.00 Internal 3 (7) 1. Introduction 9CD 3.0 is a Radio Frequency Identification (RFID) -reader to automatically and uniquely identify and track inventory and assets. Transponders can be read without line of sight. Read range can be up to a several centimeters depending on transponder size and shape. 2. Technical Specification 2.1. Operating voltage, power, electrical interfaces Current consumption is 100 mA max. Operating voltage range are 10 – 30 VDC. 2.2.
Department 9CD 3.0 – User manual Version 1.
Department 9CD 3.0 – User manual Version 1.00 Internal ‘dr’ ‘dn’ ‘db’ ‘dq’ ‘pon’ ‘poff’ 5 (7) Red led Leds off Buzzer on Buzzer off Antenna power on Antenna power off 2.5. Connector for power, serial communication and antenna The connectors are shown in picture 1. Picture 1. Connectors for power, serial communication and antenna The connector type for power & data is S4B-XH-SM4-TB and S3B-XH-SM4-TB for antenna. Both connectors are manufactured by JST.
Department 9CD 3.0 – User manual Version 1.00 Internal 6 (7) 2.1. Antenna The used Idesco antenna types are ATH or ATHC. ATH is a rectangular antenna on printed circuit board. ATHC antenna is round plastic cylinder with a diameter of 13.5mm and length of 30mm. The length of cable in both antennas can be up to 17cm. 2.2. Host Device 9CD3.0 has power supply regulation. It uses regulated 10VDC – 30VDC voltage supply which is supplied by host device. 2.3.
Department 9CD 3.0 – User manual Version 1.00 Internal 7 (7) 3. FCC and ISED Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.