User's Manual

ManualsBrands7signal ManualsElectronics802.11ac Dual Band Module

Technical Specifications

QCA9890

USERS MANUAL

3X3 2.4/5GHz 11ac miniPCIe Radio

Revision:1.03 IL

Date: 2014,11,10

Model: WLE900VX-7S 7signal Revision: V2.1

Date: 2015,08,28

Features

• Qualcomm-Atheros

QCA9880

Reference Design

• 2.4GHz max 19dBm & 5GHz max19dBm output power (per chain)

• IEEE 802.11ac complaint & backward compatible with 802.11a/b/g/n

• 3X3 MIMO Technology & up to 1.3Gbps

• MiniPCI Express 1.1 interface

•

Supports Spatial Multiplexing, low-density parity check (LDPC),

Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

• Supports IEEE 802.11d, e, h, I, k, RO, v time stamp, and w standards

•

Supported by either CompexWRT with Atheros Reference Wireless Driver, or

OpenWRT with ath10k Wireless Driver on WPJ344

• Cards are individually calibrated for Quality Assurance

Summary of content (5 pages)

PAGE 1
Technical Specifications USERS MANUAL 3X3 2.4/5GHz 11ac miniPCIe Radio Model: WLE900VX-7S Features • Qualcomm-Atheros QCA9880 QCA9890, Reference Design • 2.4GHz max 19dBm & 5GHz max 19dBm output power (per chain) • IEEE 802.11ac complaint & backward compatible with 802.11a/b/g/n • 3X3 MIMO Technology & up to 1.3Gbps • MiniPCI Express 1.
PAGE 2
Technical Specifications Notes: 1. Only the 20MHz and 40MHz bandwidth channels are available in the UNII-2C band. The 80MHz channels number 106, 122, 138 cannot be programmed to operate. 2. The newer 20MHz channel number 144 is not available and cannot be programmed to operate.
PAGE 3
Dimension Drawing Ordering Information Item Code Chipset Form factor Card Information WLE900VX-7S Atheros 9890 Full size 3x3 802.11ac 2.4G/5G PCIe mini card Compex Systems Pte Ltd 135 Joo Seng Road #08-01 Singapore 368363 Tel: +65 6286 2086 Fax: +65 6280 9947 Email: sales@compex.com.sg Compex (Suzhou) Co Ltd No.12 ChuangTou Industrial Square LouFeng North, Suzhou Industrial Park Suzhou, Jiangsu Province China 215122 Tel: +86 512 62950050 Fax: +86 512 62950026 www.compex.com.sg www.facebook.
PAGE 4
Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID.
PAGE 5
OEM integration instructions： This device is intended only for OEM integrators under the following conditions： The module is limited to only installations in mobile applications. The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter antenna. The module shall be only used with the integral antenna(s) that have been originally tested and certified with this module.