User's Manual

User Manual for the Smart Rope

Thank You for Buying the 75PAI Smart Rope.

This manual shows you how to use the smart rope. Please read this manual carefully before using

the product and keep it properly.

Ⅰ

. Download Paiactive APP

Search and install the APP.

Ⅱ

. Device Binding

1.Turn on Bluetooth on your cellphone；

2.Open the Paiactive APP to register/login, and then add “Smart Rope” in

“Device-Add Device”.

Ⅲ

. Buttons & Charging

1. Activate the Device: a short press on the left/right button to activate the device.

2. Switch the Mode: a long press on the left button for 2 seconds to switch the mode.

3. Reset the Mode: a long press on the right button for 2 seconds to reset the mode.

4. Restart the Device: a long press on the right button for 8 seconds to restart the device.

Ⅳ

. Display

1. Battery icon: it shows the current battery status; when the icon flashes, please charge the

device.

2. Exercise mode: it shows the current exercise mode, which includes free mode, time down

(skipping time) and count down (skipping count).

3. Time: it shows the skipping time or remaining time.

4. Count: it shows the count of skips done or the count of remaining skips.

Ⅴ

. Installation

Daily maintenance and matters need attention:

1. This product is not waterproof, so do not use it outdoors in rainy days.

2. Please use a piece of dry cloth when wiping the handles. Don’t use a wet one.

3. Please carefully evaluate your fi condition and have a warm-up before your start rope

skipping,

If the device doesn’t work, please try the following:

1. Please make sure the device has enough power.

2. Check your cellphone to make sure the Bluetooth is on.

3. Turn off the Bluetooth and turn on it again on your cellphone.

4. Restart your cellphone.

5. Restart the device and rebind it to your phone.

PAGE 1
User Manual for the Smart Rope Thank You for Buying the 75PAI Smart Rope. This manual shows you how to use the smart rope. Please read this manual carefully before using the product and keep it properly. Ⅰ. Download Paiactive APP Search and install the APP. Ⅱ. Device Binding 1.Turn on Bluetooth on your cellphone； 2.Open the Paiactive APP to register/login, and then add “Smart Rope” in “Device-Add Device”. Ⅲ. Buttons & Charging 1. 2. 3. 4.
PAGE 2
Product model: -LS-ET18L Color: Gray Weight: About 230g Material: ABS. Rope length:3.0 meters Connectivity: Bluetooth Battery capacity: 70mAh OS support: Andriod5.1 , iOS 11.0 and above Manufacturer: Shanghai Laisi Information Technology Co., Ltd. Address: 901, 21A No.
PAGE 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.