User's Manual
User Manual for the Smart Rope
Thank You for Buying this Smart Rope. Model No.:
LS-T20NA
This manual shows you how to use the smart rope. Please read this manual carefully before using
the product and keep it properly.
Ⅰ. Download Health PAI APP
Scan the QR code below to install the APP.
Ⅱ. Device Binding
1.Turn on Bluetooth on your cellphone;
2.Open the Health PAI APP to register/login, and then add “Smart Rope” in
“Device-Add Device”.
Ⅲ. Buttons & Charging
1. Activate the Device: a short press on the left/right button to activate the device.
2. Switch the Mode: a long press on the left button for 2 seconds to switch the mode.
3. Reset the Mode: a long press on the right button for 2 seconds to reset the mode.
4. Restart the Device: a long press on the right button for 8 seconds to restart the device.
5. Charge the Device: the charging port is located at the end of the main handle (if it’s
T20NA or T20EU, you need to unplug the silica gel plug). Please charge the device
with a standard 5V charger and a standard Micro USB charging cable.
Ⅳ. Display
1. Battery icon: it shows the current battery status; when the icon flashes, please charge the
device.
2. Exercise mode: it shows the current exercise mode, which includes free mode, time down
(skipping time) and count down (skipping count).
3. Time: it shows the skipping time or remaining time.
4. Count: it shows the count of skips done or the count of remaining skips.