Aprisa XE User Manual Version 7.4.
Copyright Copyright © 2001-2005 4RF Communications Ltd. All rights reserved. This document is protected by copyright belonging to 4RF Communications Ltd and may not be reproduced or republished in whole or part in any form without the prior written permission of 4RF Communications Ltd. Trademarks The 4RF, Aprisa, Aprisa XE, SuperVisor and Surveyor names and logotypes are trademarks or registered trademarks of 4RF Communications Ltd.
Compliance ETSI The terminal is designed to comply with the European Telecommunications Standards Institute (ETSI) specifications as follows: Radio performance EN 302 217 Parts 1, 2.1, and 2.2 EMC EN 301 489 Parts 1 & 4 Environmental EN 300 019, Class 3.2 Safety EN 60950 A terminal operating in the following frequency bands / channel sizes has been tested and is compliant to the ETSI radio specifications and suitably displays the CE logo.
Informal declaration of conformity Dansk Undertegnede 4RF Communications Ltd erklærer herved, at følgende udstyr Aprisa™ Radio overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch Hiermit erklärt 4RF Communications Ltd, dass sich dieses Aprisa™ Radio in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet.
RF exposure warning Warning: The installer and / or user of Aprisa XE radio terminals shall ensure that a separation distance as given in the following table is maintained between the main axis of the terminal’s antenna and the body of the user or nearby persons. Minimum separation distances given are based on the Maximum Permissible Exposure non-occupational limit (B or general public) of 47 CFR 1.1310 and the methodology of FCC’s OST/OET Bulletin Number 65.
