EAP737 Enterprise Access Point
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH FCC CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: EAP737 For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328: • EMC: EN 301.489-1, EN 301.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Preface Package Contents 4ipnet EAP737 is a high-end, dual radio 802.11 b/g/n + ac (Wave 2) MIMO Access Point (AP) with the best performance for business and industrial applications and is compliant with the latest 1. 4ipnet EAP737 x 1 2. Quick Installation Guide (QIG) x 1 3. Mounting Kit x 1 4.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH System Overview EAP737 Front View EAP737 Side View Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH 1 LED Indicators An LED indicator is available to show the status. 2 K-Slot Use Kensington lock for anti-theft purpose. 3 Restart / Reset Press once to restart the system; to reset the system to factory default settings, hold for more than 5 seconds. 4 12V 5 Uplink (PoE) Port 1.5 A Attach power adaptor here. Offers uplink connection. This port can be used to connect to a controller, gateway, or directly to the Internet. 802.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Hardware Installation Please follow the steps mentioned below to install the hardware of EAP737: 1. Place the EAP737 at the best location. a) The best location for EAP737 is usually at the center of your intended wireless network. - Secure mounting bracket on the wall with screws. - Attach the Access Point to the dedicated slots on the mounting bracket.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH 2. Connect the EAP737 to your network device. Connect one end of the Ethernet cable to the Uplink port of EAP737 and the other end of the cable to a switch, a router, or a hub. EAP737 is then connected to your existing wired LAN network. 3. Power on the EAP737. There are two ways to supply power over to EAP737. - EAP737 Uplink port is capable of receiving DC currents. Connect an IEEE 802.3af-compliant PSE device (e.g.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Getting Started 4ipnet EAP737 supports web-based configuration. When hardware installation is complete, EAP737 can be configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and above. The default values of LAN IP address and subnet mask of EAP737 are: IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Steps: 1.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH 4. After a successful login to EAP737, a System Overview page of the Web Management Interface will appear, as depicted below. The Web Management Interface - System Overview Page 5. To logout, simply click on the Logout button at the upper right hand corner of the interface to return to the Administrator Login Page. Click OK to logout. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Common Settings Step 1. Change Administrator’s Password Change Password Page Click on the Utilities icon on the main menu, and select the Change Password tab. Enter a new password with a length of up to 32 characters, and retype it in the Re-enter New Password field. Click SAVE to save the changes. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Step 2. Configure General AP (Access Point) Settings Wireless General Settings Page Click on the Wireless icon on the main menu, and then select the General tab. Determine the Band, Protocol and Channel settings: Select your preferred Band, Protocol and Channel for you wireless connection. For example, select 2.4GHz for the band, 802.11g+802.11n for the protocol and 6 for the channel. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Step 3. Configure VAP (Virtual Access Point) Profile Settings VAP Configuration Page (VAP-1 shown) Configure VAP profile settings： (a) Select the VAP Configuration tab to configure the settings of the desired VAP. (b) Enable a specific VAP from the drop-down menu of Profile Name and configure related settings below.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Virtual AP Overview Page Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Step 4. Configure WDS (Wireless Distribution System) Settings (Optional) To extend the wireless coverage, EAP737 supports WDS links on each RF card for connecting wirelessly to other WDS-capable APs (peer APs). By default, all WDS profiles are disabled. Click on the Wireless button on the main menu. Select the Repeater Settings tab. Choose WDS as the Repeater Type. Choose the desired WDS profile: (a) Enable WDS.
Quick Installation Guide EAP737 Enterprise Access Point ENGLISH Congratulations! Now, 4ipnet EAP737 is installed and configured successfully. After EAP737's network configuration is completed, please remember to change the IP Address of your PC Connection Properties back to its original settings in order to ensure that your PC functions properly in its real network environments. It is strongly recommended to make a backup copy of your configuration settings.
