Product Handbook EAP760 V1.
Product Handbook EAP760 Enterprise Access Point ENGLISH Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content.
Product Handbook EAP760 Enterprise Access Point ENGLISH FCC CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Handbook EAP760 Enterprise Access Point ENGLISH CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: EAP760 For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328: • EMC: EN 301.489-1, EN 301.
Product Handbook EAP760 Enterprise Access Point ENGLISH Preface Package Contents 4ipnet EAP760 is a high-end, dual radio 802.11 b/g/n + ac MIMO Access Point (AP) with the best performance for business and industrial applications 1. 4ipnet EAP760 x 1 2. Quick Installation Guide (QIG) x 1 3. Wall Mount Kit x 1 and is compliant with the latest industrial wireless security standards that are required in the tightly secured enterprise network environments.
Product Handbook EAP760 Enterprise Access Point ENGLISH System Overview EAP760 Front View 1 External Antenna External antennas via SMA connectors. 1a, 1b and 1c corresponds to Ant1, Ant2 and Ant3 of the system. 2 LED Indicator An LED indicator is available to show the AP’s operation status. Green indicates power on, and orange indicates WES’ status. Copyright © 4IPNET, INC. All rights reserved.
Product Handbook EAP760 Enterprise Access Point ENGLISH EAP760 Back View 1 12V 2.5 A 2 Uplink (PoE) Port Attach power adaptor here Offers uplink connection. This port can be used to connect to a controller, gateway, or directly to the Internet. 802.3at PoE is also supported 3 LAN 1 Port The ports for connections with LAN side devices 4 USB Port USB interface reserved for future use 5a WES Button (A) For IT administrators to easily setup WDS links with the RF card (A).
Product Handbook EAP760 Enterprise Access Point ENGLISH Hardware Installation Please follow the steps mentioned below to install the hardware of EAP760: 1. Place the EAP760 at the best location. The best location for EAP760 is usually at the center of your intended wireless network. 2. Connect the EAP760 to your network device. Connect one end of the Ethernet cable to the Uplink port of EAP760 and the other end of the cable to a switch, a router, or a hub.
Product Handbook EAP760 Enterprise Access Point ENGLISH Getting Started 4ipnet EAP760 supports web-based configuration. When hardware installation is complete, EAP760 can be configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and above. The default values of LAN IP address and subnet mask of EAP760 are: IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Steps: 1.
Product Handbook EAP760 Enterprise Access Point ENGLISH Administrator Login Page 4. After a successful login to EAP760, a System Overview page of the Web Management Interface will appear, as depicted below. The Web Management Interface - System Overview Page 5. To logout, simply click on the Logout button at the upper right hand corner of the interface to return to the Administrator Login Page. Click OK to logout. Copyright © 4IPNET, INC. All rights reserved.
Product Handbook EAP760 Enterprise Access Point ENGLISH Common Settings Step 1. Change Administrator’s Password Change Password Page Click on the Utilities icon on the main menu, and select the Change Password tab. Enter the old password and then a new password with a length of up to 32 characters, and retype it in the Re-enter New Password field. Click SAVE to save the changes. Copyright © 4IPNET, INC. All rights reserved.
Product Handbook EAP760 Enterprise Access Point ENGLISH Step 2. Configure General AP (Access Point) Settings Wireless General Settings Page Click on the Wireless icon on the main menu, and then select the General tab. Determine the Band and Channel settings: Select your preferred Band and Channel for you wireless connection. For example, select 802.11g+802.11n for the band and 6 for the channel. For a detailed guide to configuration, please refer to the EAP760 User Manual.
Product Handbook EAP760 Enterprise Access Point ENGLISH Step 3. Configure VAP (Virtual Access Point) Profile Settings VAP Configuration Page (VAP-1 shown) EAP760 supports up to 16 virtual APs (VAPs) per RF Card. Configure VAP profile settings： (a) Select the VAP Configuration tab to configure the settings of the desired VAP. (b) Enable a specific VAP from the drop-down menu of Profile Name and configure related settings below.
Product Handbook EAP760 Enterprise Access Point ENGLISH Virtual AP Overview Page Copyright © 4IPNET, INC. All rights reserved.
Product Handbook EAP760 Enterprise Access Point ENGLISH Step 4. Configure WDS (Wireless Distribution System) Settings (Optional) To extend the wireless coverage, EAP760 supports up to 8 WDS links for connecting wirelessly to other WDS-capable APs (peer APs). By default, all WDS profiles are disabled. Click on the Wireless button on the main menu. Select the Repeater Settings tab. Choose WDS as the Repeater Type. Choose the desired WDS profile: (a) Enable WDS.
Product Handbook EAP760 Enterprise Access Point ENGLISH After EAP760's network configuration is completed, please remember to change the IP Address of your PC Connection Properties back to its original settings in order to ensure that your PC functions properly in its real network environments. It is strongly recommended to make a backup copy of your configuration settings. For further configuration and backup information, please refer to the User’s Manual. P/N: V10020140703 Copyright © 4IPNET, INC.
