EAP210 or OWL530 Handbook
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH FCC CAUTION This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Professional installation instruction 1. Installation personal 4ipnet OWL530 is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: OWL530 For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328: • Radio: EN 50392 • EMC: EN 301.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Preface Package Contents 4ipnet EAP210 or OWL530 is a high-end 1. 4ipnet OWL530 x 1 or EAP210 x 1 802.11a/b/g/n 2.4GHz/ 5GHz MIMO Selectable Dual 2. Quick Installation Guide (QIG) x 1 Band Access Point (AP) designed to maximize 3. CD-ROM (with User’s Manual and QIG) x 1 deployment flexibility and feasibility for IT 4. AC-DC Adaptor ( EAP210 only) administrators. 5.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Hardware Overview of EAP210 Front Panel Figure 1 EAP210 Front Panel Rear Panel 1 (1) 2 3 4 5 6 Figure 2 EAP210 Rear Panel -2- 7 1 (2)
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH 1 Antenna Connector Reverse SMA connectors for attaching antennas. 1 (1) is the primary antenna connector and 1 (2) is the secondary. Utilize both connectors for 802.11n MIMO optimized performance. 2 12V 2A 3 Uplink Port Power Socket for the power adaptor. The port for uplink connection to another gateway or device. PoE (802.3af/at) is supported. 4 WES Button WDS Easy Setup.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Hardware Overview of OWL530 OWL530 1 Ventilation Valve 2 3 4 Ground Connector PoE Connector N-type Connector x 2 Due to extreme weather conditions, water vapor in the OWL530 may condense. The valve allows ventilation to prevent moisture buildup within the OWL530. For connecting the ground wire. For connecting to the Power Sourcing Equipment (PSE).
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH The following diagram is a basic network topology which can be used for testing and configuring the OWL530. Installation Steps: Step 1. Step 2. Connect two N-type antennas to the N-type connectors Connect one end of an Ethernet cable to the PSE (POWER & DATA OUT) to the PSE and one end to the OWL530.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH - Wrap (B) around (A) through the slit on (B) - Insert Parts (A) and (B) together into the PoE Port Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Step 3. Step 4. Step 5. Note: Screw cap (C) onto the PoE Port Connect one end of another Ethernet cable to the PSE (Data Link) and the other end to a computer. Connect the power cord to the PSE. Power on the PSE in order to supply power to the OWL530. Please do NOT remove or tamper with the ventilation valve as it has been pre-installed and secured.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Step 3. Secure the OWL530 by screwing on the nuts after the inserting the washers for all four corners. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Basic setting of EAP210 or OWL530 4ipnet EAP210 or OWL530 supports web-based configuration. It is required to follow the respective installation procedures provided to properly set up the desired mode for this system. Default IP Address of Web Management Interface: The default IP address and Subnet Mask for the AP is as follows: Mode IP Address Subnet Mask Step 1: AP Mode 192.168.1.1 255.255.255.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Step 3: System Login The system manager Login Page will then appear. Enter “admin” in the User name field and “admin” in the Password field, and then click Login to log in. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Step 4: Login Success After a successful login to EAP210 or OWL530, a System Overview page of web management interface will appear, To logout, simply click on the Logout button at the upper right hand corner of the interface. Note: AP mode is the default mode. The administrator must access the system via the AP mode login page first before switching modes. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Common Settings Step 1: Mode Confirmation Ensure the Operating Mode is currently in AP mode. Click on the Status button and then select the System Overview tab. The Operating Mode is at the System section on the System Overview page. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Step 2: Change Password Click on the Utilities button and then select the Password tab. Enter a new password in the New Password field and retype it in the Re-enter New Password field. Click SAVE to save the changes. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Step 3: Network Settings 【Example Settings】 Click on the System button and then select the Network Interface tab. Click the Static radio button and enter the related information in the fields marked with red asterisks. Click SAVE to save the settings. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Step 4: SSID Settings Click on the Wireless button and select the General tab. Band: Select an appropriate band from the drop-down list box. Click on the Wireless button and select the VAP Config tab. ESSID: Enter respective ESSID for each VAP in the ESSID field or use the default. ESSID (Extended Service Set Identifier) is a unique identifier used for networking devices to get associated with th AP.
Quick Installation Guide EAP210 or OWL530 Enterprise Access Point ENGLISH Step 5: Security Settings Click on the Wireless button and then select the Security tab. Select the desired VAP Profile and Security Type from the drop-down list boxes. The system supports various WiFi standard security such as WEP, WPA Personal, WPA Enterprise, and 802.1X. The above figure depicts an example of selecting VAP-1 and WEP. Enter the information required in the blank fields.
