User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) V1.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH Copyright Notice This document is protected by USA copyright laws and other laws and is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH FCC CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: SDS200W For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328: • EMC: EN 301.489-1, EN 301.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH 1. Introduction Overview of Network Ticket Generator SDS200W is an innovative product 4ipnet offers to facilitate the communication between 4ipnet hotspot gateway and serail POS printer.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH 2. Device Overview Keypad Panel Overview Useful Shortcut Keys Combination ‘Number’ + ENTER Function To create and print out an on-demand account of an enabled billing plan of the uplink Hotspot gateway mainly for the user who purchased an account. ‘Number 1’ + ‘asterisk (*)’ + ‘Number 2’ + ENTER Print a ticket of billing ‘Number 1’ with ‘Number 2’ units.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH order to protect SDS200W’s information leakage. ‘4-digit’ + ENTER To unlock Safe Mode. This 4-digit password can be changed on the WMI at “System >> Safe Mode (Password).” The default value is ‘0000.’ ‘asterisk (*)’ + ENTER To lock the keypad, excluding the TAS and the Reset button. In Lock Mode, the Status indicator will enter into special flashing.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH is constantly off if the RF card is disabled. Understanding the LED indicators There are four LED indicators on the panel : Power, Status, LAN, and WLAN from left to right. Below summarizes all indication types in different states: Right Side Panel Overview Right Side Panel 1. Kensington Lock Be used to lock the device to a pole. 2. Restart / Reset Pole once to reboot the system.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH Left Side Panel Overview Left Side Panel 1. Console Serial port for connecting to a POS printer. 2. Ethernet RJ-45 Ethernet port Serial port for connecting to the uplink gateway via wire. 3. 5V / 1.5A The DC power socket for connecting to an external power source through a DC power supply. 4. Antenna connector Assemble the dipole antenna within the package here. Copyright © 4IPNET, INC. All rights reserved.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH 3. Including SDS200W into Your Network The following diagram illustrates some deployment examples that show how to connect SDS200W to the POS printer and 4ipnet Gateways/Controllers. 1. Put relevant devices in place. 2. Attach a SDS200W to a power adaptor provided in the package. 3. Attach a POS printer to a power adaptor provided in the package and turn on the power switch situated on the left side of the device. 4.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH 4. Managing SDS200W on the Web Management Interface SDS200W is designed specifically to operate in conjunction with all 4ipnet Gateways/Controllers, including both HSG and WHG series. If you are not using default settings, before connecting SDS200W to your 4ipnet Gateway/Controller, some configurations steps are required. Go to the Web Management Interface (WMI) for SDS200W’s relevant configurations.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH after rebooting the system. 3. Console – to change console related settings for POS printers. 4. Utility – to upgrade the firmware version or backup/ restore SDS200W’s configuration settings. 5. Password – to change administrator’s password. 6. Reboot – to reboot (restart) the system. 7. Status – to overview device, system, uplink, and radio status if available. Copyright © 4IPNET, INC. All rights reserved.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH 5. SDS 200W with POS printer 5.1 Serial Settings To make a POS printer properly functions with SDS200W, set up serial settings in advance in Console on SDS200W’s WMI. The default values are for PRT-100 devices. Change the values if you use another POS printer. 5.2 Printing On-demand Tickets for Your Customers Operators have two ways of printing on-demand account tickets for their customers.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH 6. SDS 200W with 4ipnet Gateway/Controller SDS200W offers ‘manual’ and ‘auto’ connection to uplink 4ipnet Gateway/Controller. The former implies that administrator would have to go on to SDS200W’s WMI, filling in necessary columns that are supposed to fit what is set up on the controller end.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) The recommended step-by-step setup process is shown as follows. ENGLISH When the settings are done completely on the 4ipnet Gateway/Controller side, go to SDS200W’s WMI and check if every uplink setting matches that on the controller. 6.2 Terminal Auto Setup (TAS) TAS refers to an automatic connection mechanism that requires NO previous network settings.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH the Ethernet cable is plugged/ the wireless environment is ok. Wired TAS uses port 5000 as the default value. The controller has to set the port to Note: the number, as well. Additionally, when trying to deploy TAS, make sure that the table of Terminal Server Configuration on the controller side is not filled up. Otherwise, the connection must fail. Copyright © 4IPNET, INC. All rights reserved.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH Appendix A. Trouble Shooting Q1. SDS200W can not have the POS printer print out accounts 1. See if the printer is still connected to SDS200W. 2. Check if the panel is locked by looking at the Status indicator. If it belongs to special flashing, unlock the keypad by pressing asterisk (*) + ENTER. 3. Press FUNC + ‘1’ + ENTER to see SDS200W’s state. Check if every value is proper. 4. See the Status indicator on the device panel.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) Appendix B. Connection Status with the Indicators Display State Long illuminated intervals SDS200W and the uplink device are connected. Short illuminated intervals The system is ready, but uplink connection has not been set up yet. Fast flashing (TAS) SDS 200W is trying to connect to the uplink controller. Special flashing The keypad is locked. Unlock it by pressing asterisk (*) + ENTER. It is a 10-second state.
User Guide Wireless Network Ticket Generator (SDS200W and POS Printer) ENGLISH Appendix C. Shortcut Keys Combination ‘Number’ + ENTER Function Print a ticket of billing plan ‘Number’ ‘Number 1 ’ + asterisk (*) + ‘Number 2’ Print a ticket of billing ‘Number 1’ with ‘Number 2’ units. +ENTER FUNC + ‘1’ + ENTER FUNC + ENTER FUNC + ‘0’ + ENTER To print out SDS200W’s status. To clear what is pressed.