EAP300 V2.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH FCC CAUTION FCC Class B Statement: This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: EAP300 The device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328: • Radio: EN 301 893 • EMC: EN 301.489-1, EN 301.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Preface 4ipnet EAP300 Package Contents is a high-end 802.11n/a/b/g 1. EAP300 x 1 dual-band MIMO Access Point (AP) with the best 2. Quick Installation Guide x 1 price/ performance for enterprise and industrial 3. CD-ROM (with User’s Manual and QIG) x 1 applications and is compliant with the latest 4. Power Adapter (DC 12V) x 1 industrial wireless security standards that are 5. Cat.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH System Overview Connector Panel EAP300 Connector Panel 1 Console Attach the serial cable here. 2 Restart/Reset Button Press once to restart the system; Press and hold for more than 5 seconds to reset to factory default. Attach the power adapter here. 3 12 4 WES Button Press to start running WES process. 5 LAN Attach the Ethernet cable here for connecting to wired local network, 6 USB For future use.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH LED Panel Figure 1 EAP300 LED Panel 1 LED ON indicates power on; OFF indicates power off. 2 LED OFF indicates RF is not ready; ON indicates RF is ready; CLINKING indicates transmitting/receiving data. 3 LED ON indicates Ethernet cable connected; OFF indicates no connection. 4 For future use. 5 To indicate WES status.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Hardware Installation Please follow the steps mentioned below to install the hardware of EAP300: 1. Place the EAP300 at a best location. The best location for EAP300 is usually at the center of your wireless network. 2. Connect EAP300 to your network device. Connect one end of the Ethernet cable to the LAN port of EAP300 and the other end of the cable to a switch, a router or a hub.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Getting Started 4ipnet EAP300 supports web-based configuration. Upon the completion of hardware installation, EAP300 can be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and above. The default values of LAN IP address and subnet mask of EAP300 are: IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Steps: 1.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH 4. After a successful login into EAP300, a System Overview page of web management interface will appear, as depicted below. 5. To logout, simply click on the Logout button at the upper right hand corner of the interface to return to the Administrator Login Page. Click OK to logout. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Common Settings Step 1. Change Administrator’s Password Change Password Page ¾ Click on the Utilities main menu button, and then select the Change Password tab. ¾ Enter the old password and then a new password with a length of up to 32 characters, and retype it in the Re-enter New Password field. ¾ Click SAVE to save the changes. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Step 2. Configure General AP (Access Point) Settings Wireless General Settings Page ¾ Click on the Wireless main menu button, and then select the General tab. ¾ Determine the Band and Channel settings: Select your preferred Band and Channel for you wireless connection. For example, select 802.11n+802.11g for the band and 1 for the channel. Copyright © 4IPNET, INC. All rights reserved.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Step 3. Configure VAP (Virtual Access Point) Profile Settings ¾ EAP300 supports up to 8 virtual APs (VAPs). ¾ Configure VAP profile settings： (a) Select the VAP Configuration tab to configure the settings of the desired VAP. (b) Enable a specific VAP from the drop-down menu of Profile Name and configure related settings below.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Virtual AP Overview Page Step 4. Configure WDS (Wireless Distribution System) Settings (Optional) To extend the wireless coverage, EAP300 supports up to 4 WDS links for connecting wirelessly to other WDS-capable APs (peer APs). By default, all WDS profiles are disabled. ¾ Click on the Wireless main menu button. ¾ Select the Repeater Settings tab. ¾ Choose WDS as the Repeater Type.
Quick Installation Guide EAP300 802.11n/a/b/g Enterprise Access Point ENGLISH Congratulation! Now, 4ipnet EAP300 is installed and configured successfully. After EAP300's network configuration is completed, please remember to change the IP Address of your PC Connection Properties back to its original settings in order to ensure that your PC functions properly in its real network environments. z It is strongly recommended to make a backup copy of the configuration settings.
