0.
Read Before Use Your tablet is manufactured and designed for mobile use. As the tablet software is updated regularly, this User Manual may not cover all aspects of new features. Please read the following instructions carefully: ● Do not place objects on top of the tablet, as objects may scratch the screen. ● Protect the device from moisture, dust or smoky environments, as these may harm the tablet. The tablet is not resistant to water or moisture. Avoid using the tablet in a humid environment.
Read Before Use (continued) ● ● ● ● cause device overheating. To prevent discomfort or injury from heat exposure, do not leave the tablet on your lap or other parts of the body. Once charged, disconnect the tablet from the outlet. Do not use a pen or any sharp object to tap the screen. Clean only with a dry, soft cloth. Do no disassemble with tablet. Refer to a certifie service technician for repairs. Do not disconnect the tablet during formatting, installing or removing external devices.
Tablet Overview 5 6 7 88 9 4 3 2 1 UNIQCELL 1.Reset 2.Power 3.Volume down 4.Volume up 5.Earphone 6.Micro USB Port 7.Micro SD Card Slot (Request open the back cover) 8.Dual SIM Card Slot (Request open the back cover) 9.
Touchscreen Basics Tap Tap the screen once to activate an item. Touch & Hold Touch and hold to move an item by dragging. In many apps, touch and hold can offer more options. Swipe Quickly swipe your finger vertically or horizontally across the screen to move to other home pages or scroll through documents. Zoom in Touch the screen with two fingers and pinch them together. Zoom out Touch the screen with two fingers and spread them apart.
Initial Setup Charging Fully charge your tablet for at least six hours before initial use. The battery icon at the upper right corner of the screen indicates the battery level or charging status. 1. Plug the small end of the USB cable into the micro USB port on the side of the device, and then plug the larger USB end into the power adapter. 2. Once fully charged, disconnect the device from the charger. Unplug the charger from the device first, and then unplug it from the electric outlet.
the Installer Wizard, you may install them at a later time by tapping on the home screen. Home Screen When you turn on your tablet for the first time, you will see the main home screen panel. This panel is typically centered; you can access additional panels on either side of the main one by swiping your finger left or right. The menu, home and back keys help you navigate your tablet. You can adjust volume using the VOL+ and VOLbuttons. Swipe up to reveal more apps.
Homescreen Icons Battery Level: The white battery level indicator will decrease and change to red as the battery is drained. Wi-Fi® Signal: As the Wi-Fi® signal strength decreases, the blue bands will change to grey. All Apps: Tap to view all apps. Back: Go back to the previous screen. Recent apps: Open a list of recent apps. Tap an app to open or swipe left/right to remove the thumbnail. Home: Go back to the home screen. Hold and slide up to open Google Now™.
Connecting to Wi-Fi® 1. On the home screen or menu list, tap the Settings icon and then tap Wi-Fi® to turn it on. 2. The Wi-Fi® section will show the list of networks detected. 3. Tap the desired Wi-Fi® network you want to connect to. When connected, the wireless indicator appears in the status bar. The white lines indicate connection strength. Note: If you select a secured network, you will be asked to enter the network key or password.
Camera Tap the camera app to take pictures and videos to share with your friends and family. Taking Photos ● Make sure the icon bar on the left shows the camera icon. ● Tap the camera icon to take a photo. ● Pinch two fingers together on the screen to zoom. ● Tap the menu icon in the top right corner for camera settings. To switch to video record mode, swipe right from the left icon bar. Select the video icon. You can also change the resolution settings and try advanced features.
and then you can make a call by the right APP. ● It supports full freq uency of 2G, and it supports 3G bands as below: 900/1900/2100. And it support Dual Card and Dual Standby. Specifications ● ● ● ● ● ● ● ● ● ● ● 10.1” 800x1280 IPS Screen Android 11 2GB RAM 32GB Built-in Storage USB Input Support 3G band（900/1900/2100） Dual card and Dual Standby 3.5mm Headphone Jack Front and Back Cameras 5000mAh Battery Built-in G Sensor IN THE BOX ● ● ● ● ● ● 10.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Space 10
