BlueCheck III (BC3) User Manual Version 1.
3M COGENT BLUECHECK III, BC3, CSD330 FBI CERTIFIED SAP LEVEL 30 OPTICAL FINGERPRINT SENSOR, EMEBEDDED WITH WINCE 6.0 CORE AND BLUETOOTH Platen Dimensions Active Window Dimensions (Image dimensions) Geometric Distortion Illumination Uniformity Resolution Grayscale Quantization On-Device FRR On-Device FAR Allowable Finger Rotation WSQ Compression Ratio 1.18” Vertical * 1.26” Horizontal (30 mm * 32 mm) 1.0” * 1.0” (25.4 mm * 25.
Wireless Module Bluetooth V2.0 Operating System: Device PDA Requirements WinCE 6.0 Core Compatible with Motorola MC75 and other models embedded with Microsoft Windows Mobile OS Accessories: Cables Extra battery Pouch Lanyard Hood Dimensions: Sealing : Compliances : EMI : 1 x USB Data/ Power cable 1 x Extra Battery Li-ion 3.7V 3600 mA/h 1 x Pouch Nylon 1 x Lanyard 1 x Ambient Light Rubber Hood 7.4” L * 2.1” W * 2.
INTERFACES BC3 holds simplest interfaces of biometric handheld device: Ÿ Three buttons: Power button, Process button and Switch button. Ÿ Three LEDs: Power LED, Bluetooth LED and Process LED. Ÿ One color LCD. Ÿ Optical Fingerprint capture sensor. Ÿ Sensor cover. Optical Fingerprint Capture Sensor, FBI PIV certified, 1 * 1 inch image dimesion & Sensor Cover Process Button Power Button Switch Button Notifications LEDs Power LED Process LED Bluetooth LED 1.
Power Button Ÿ Hold down this button for 3 seconds to turn on BC3. Ÿ Press this button to switch to “Shut Down” menu. Ÿ Hold down this button for 5 seconds to force device turn off. Process Button Ÿ Press this button to run the function displayed on LCD. Switch Button Ÿ Press this key to switch to next function. Power LED Ÿ Red color LED. Ÿ It will be turned on when battery is low. Ÿ It will be turned on when device is charging. Bluetooth LED Ÿ Blue color LED.
Ÿ Delete One menu to turn off BC3: Ÿ Shut Down Menu “Capture” It’s the default menu after turning on BC3. Press down Process button to start fingerprint capture function. Menu “Calibrate” Press down Process button to calibrate fingerprint sensor. Menu “Pairing” Hold down Process button for 5 seconds then BC3 will switch to Pairing mode. The host device can search and pair BC3 with Bluetooth interface between 60 seconds.
Menu “Delete” Press down Process button to delete fingerprint data stored in BC3. Menu “Shut Down” Press Power button and BC3 will switch to this menu. Press Process button to turn off BC3 when menu “Shut Down” is displayed on LCD. Press Switch button to exit when menu “Shut Down” is displayed on LCD.
PARAMETERS There are some parameters in BC3 Pin Code The default pin code is “00000000”, it just active when BC3 under pairing mode. The host device should input pin code correctly in Bluetooth pairing. This pin code can be changed by Utility BC3Options.exe. FCC ID: ZYF-BC3 This device complies with Part 15 of the FCC Rules.