ILP 0001 User’s Manual Revision 1.0 3J Tech Co., Ltd. 342 Fu-Hsing N. Rd., 2F Taipei, Taiwan Tel: +886-2-2500 6916 info@3jtech.com.tw 3JTech (A3J Eng.), Inc. 15344 E. Valley Blvd., Suite C City of Industry, CA 91746 USA Tel: 1-626-934 7600 info@3jtech.
Revision History Revision Date Changes 1.0 March 19,2007 First Release / Kiwi Huang Related Documents or Files 1) ISSC ISBTM8-3 Bluetooth Module specification.. 2) SI3014 silicon DAA data sheet.
General Description The ILP 0001 is a highly integrated, low-cost, high performance, and low-power dissipation wireless modem. This wireless modem implements V.90 to achieve Internet connection rates up to 56Kbps, supporting existing V.34 data mode, DTE terminal and provide reliable connection with connection rate ranging from 300bps up to 115200bps I SSC I SBTM8- 3 Bluet oot h Class1 m odule Transm it t er power m eet Class 1 requirem ent RF- Wireless Frequency 2400- 2483.
Specification . Data mode capabilities: . ITU-T V.90 . ITU-T V.34 . ITU-T V.32bis, V.32 . ITU-T V.22bis,V.22 . ITU-T V.23, V.21 . Bell 212 . Bell 103 . V.42 error correction (LAPM and MNP) . V.42bis and MNP class 5 data compression . TIA/EIA 602 standard for AT command set .
ACX Advanc e d Ce ramic X AT9520 Series Multilayer Chip Antenna Features Monolithic SMD with small, low-profile and light-weight type. Wide bandwidth Applications 2.4GHz WLAN, Home RF, Bluetooth Modules, etc. Specifications Part Number AT9520B2R4HAA_ Frequency Range (MHz) Peak Gain (XZ-V) Average Gain (XZ-V) VSWR Impedance 2400~2500 3.0 dBi typ. 1.0 dBi typ. 2 max.
IDEAL LIFE Pod™ Location/Interferance IDEAL LIFE Pod™ Location/Interferance When using an IDEAL LIFE Pod™ to communicate information from your IDEAL LIFE BP-Manager™, wireless radio waves are used.
Before You Start Before You Start To assure the correct use of the product basic safety measures should always be followed including the precautions listed below: • Read all information in the instruction manual and any other literature included in the box before using the unit. • Follow the instructions of your healthcare provider. • Contact your physician for specific information about your blood pressure. • Operate the unit only as intended. Do not use for any other purpose.
Before You Start YOUR IDEAL LIFE Pod™ Power button LED Display AC Adapter Jack Telephone line cord RJ11 Jack For Telephone Connection Telephone line cord RJ11 Jack For Line Connection Battery Cover Instruction Manual 8
Installation Installation ! FOR YOUR IDEAL LIFE Pod™ ! Connecting your IDEAL LIFE Pod™ USING AN RJ11 JACK CAUTION! • Unplug phone cord from wall before installing, plugging in an external power source, or changing batteries. • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wire or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines.
Installation Press the POWER button on top of the IDEAL LIFE Pod™ to begin. RECHARGING BATTERIES WITH YOUR IDEAL LIFE POD™: • Remove the battery compartment door on the bottom of your IDEAL LIFE Pod™ by pushing gently in the direction shown on the battery cover. • Place the rechargeable batteries as marked. • Replace the battery compartment door and push the compartment door shut in the opposite direction shown on the battery cover.
Installation POWERING UP YOUR IDEAL LIFE BP-Manager™ INSTALLING THE BATTERIES (INCLUDED) • Remove the battery compartment door on your IDEAL LIFE BP-Manager™ by lifting the battery door using the notch • Place the batteries as instructed • Replace the battery compartment door and click into place FIRST TIME POWER UP AND ACTIVATION To use the IDEAL LIFE BP-Manager™ with your IDEAL LIFE Pod™ you must call an IDEAL LIFE customer representative to activate. Make sure to call IDEAL LIFE before you begin.
Installation On the next screen, you will be asked to confirm your IDEAL LIFE Pod™ ID number, so as to ensure that you are LINKING your IDEAL LIFE BP-Manager™ with your IDEAL LIFE Pod™ correctly. Simply use the buttons labelled YES or NO to confirm the number. You will find the IDEAL LIFE Pod™ ID number displayed on the bottom of the IDEAL LIFE Pod™ or on the bottom of the IDEAL LIFE Pod™ box. Multiple IDEAL LIFE Manager™ devices can be LINKED to a single IDEAL LIFE Pod™.
FCC Label Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ILP 0001 User’s Manual AT Command Set
Section 1. Data Mode Command A/ Executes Last Command When modem receives this command, modem executes the last command string entered. Do not conclude it by pressing “Enter”. A Answer Command This command instructs the modem to go off-hook and answer an incoming call. Bn Communication Standard Setting This command determines ITU-T vs. Bell standard. B0* Selects ITU-T V.22 mode when the modem is at 1200 bits/s. (Default) B1 Selects Bell 212A when the modem is at 1200 bits/s.
On Return Online to Data Mode O0* Exit online command mode and return to data mode (see AT Escape Sequence, +++AT). (Default) O1 This command issues a retrain before returning to online data mode. O2 This command issues a rate re-negotiation before returning to online data mode. Result Codes: OK n = 0, 1, 2 ERROR Otherwise P Select Pulse Dialing This command configures the modem for pulse (non-touch-tone) dialing.
Zn Recall Stored Profile This command instructs the modem chip set to go on-hook and restore the profile saved by the last &W command. Z0* Reset modem and retrieve active configuration profit from stored profit 0. (Default) Z1 Reset modem and retrieve active configuration profit from stored profit 1.
&Yn Select Stored Profile for Power On or Reset This command does not change the behavior of the modem but is included for compatibility with applications that issue the &Y0 command &Y0* Select stored profile 0. (Default) &Y1 Select stored profile 1. Result Codes: OK n = 0,1 ERROR Otherwise &Zn = x Store Telephone Number This command is used to store up to three dialing strings in the modem nonvolatile memory for later dialing.
*NCnn Country select This command provides customers chose the country for phone line regulation.
Section 2. Result Code Section 3.
S6 Wait Before Dialing This register sets the length of time, in seconds, that the modem must wait (pause) after going off-hook before dialing the first digit. The modem always pauses for a minimum of two seconds, even if the value of S6 is less than two seconds. Waiting for dial tone call progress features (W dial modifier in the dial string) will override the value in register S6. This operation, however, may be affected by some ATX options according to country restrictions.
S22 Bit mapped Register Bit-mapped register S22 lets you control internal speaker and the modem responses.
Section 4. Class 1 FAX Commands The modem chip set supports FAX commands conforming to EIA standard 578. These commands are given here with short descriptions; complete explanations are given in the standard, available from the Electronic Industry Association.
sds=128 Normal level of sensitivity(-40dbm) sds>= 128 More aggressive ;ex.
%tt5=10 : V17 14400 short train %tt5=11 : V17 14400 long train