User's Manual

User Manual

1) This remote control lock has the same unlocking function as the

ordinary lock, and there is also a password wheel at the bottom. The

difference is that the password cannot unlock the lock, and the

unlocking function can only be realized when used together with the

remote control; this lock also has RFID sensing function.

2) Power-on function: When the host is powered on, there is a small

hole on the side, insert it with a thimble, touch the power button to the

power button, the host will vibrate for 5 seconds, indicating that it is

powered on; It goes out in seconds, indicating that it is turned on,

and the remote control unlocking function can be realized after

turningiton.

3) Instant remote control unlocking function: Press the remote control

instant unlocking button (big button), the blue light of the remote

control flashes once, and you can feel the motor of the host machine

rotate a bit at this time, and you can see the blue light from the plug

hole at this time. When the light is on, the lock can be unlocked by

hand-pulling the lock beam.

PAGE 1
User Manual 1) This remote control lock has the same unlocking function as the ordinary lock, and there is also a password wheel at the bottom. The difference is that the password cannot unlock the lock, and the unlocking function can only be realized when used together with the remote control; this lock also has RFID sensing function.
PAGE 2
4) Delayed unlocking function: press the delayed unlocking function of the remote control (small button), the blue light of the remote control flashes quickly 3 times, wait for 15 seconds at this time, and then extract the lock beam by hand to unlock. 5) Locking function: Press down the lock beam of the padlock host for 4 seconds, and you can feel the motor in the host reverses, that is, it is locked.
PAGE 3
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.