Operation Instruction for – Hercules Joystick series Waist harness model ISO 9001:2000 Jan 2005
Your value-added selection 3e Table of Contents Introduction .....................................................................................3 Hercules Features .....................................................................................3 Hercules Specifications .....................................................................................4 How to Turn on Transmitter ......................................................................................
Your value-added selection 3e Introduction Suitable for multi applications, we made Hercules joystick type remote controller serves, it’s proper purpose in every single place… Hercules Joystick type remote controller could be used for almost all of the environments, design fit to ergonomic which could release the strain from neck after long time operation. We offered different models for selection to meet your need. A suitable tool could always save your time, money and energy.
Your value-added selection 3e Hercules specifications RECEIVER Frequency range: 868MHz ( 20 channels ) TRANSMITTER Frequency range: 868MHz ( 20 channels ) Frequency control: Quartz crystals Frequency control: Quartz crystals Channel spacing : 60KHz Channel spacing : 60KHz Output power: less than 10mW Output power: less than 10mW Operation temperature: -10°C~ +70°C Operation temperature: 0°C~ +70°C Ratio output voltage: 0 ~ 10V (coordinate w/ Antenna impedance: 50Ω inverter) Ratio output current: 0 ~
Your value-added selection 3e How To Turn On Transmitter ( 1 ) Power on receiver. ( 2 ) Push any toggle switch and release OR push any axis-fingertip joystick and release to operate ( 3 ) And simply push R1 toggle switch to on & release ( 4 ) Now Hercules is ready for operation. How to Turn Off Transmitter ( 1 ) Push-down EMS button, then pull out the power-on key. The EMS stop button is with dual protections, every motion will be terminated in 0.1 sec.
Your value-added selection 3e (e) Same channel remote controllers shall be installed at least 50M away, to avoid possible interruption (f) Ensure cabling is correct & stable (g) Test the transmitter after installation, ensure every motion is the same as the original wired control (h) Fix the original wired control panel in firmed place Avoid receiver be installed inside the control panel or on the top Using 4 screws with electric screw driver ( fig.
Your value-added selection 3e Extend antenna Instant connector Receiver Cable connector set ( fig. 5 ) User’s Reminder Study this Operation Instruction carefully before usage, ensure every single step is clear. Hercules remote controller could only be operated after complete training and authorized. If damaged occurred, shut down Hercules and call your agent, never try to repair by your own to avoid unnecessary danger. Battery cover Power-on key EMS stop ( fig. 6 ) Hercules transmitter ( fig.
Your value-added selection 3e Function Checking/ Maintaining Steps Takes 2 minutes to check / maintain device regularly will always extend Hercules operation period… Hercules checking steps – 1. Keep safety distance between loading goods / crane and operators 2. Send power to receiver 3. Switch on transmitter by steps ( please refer ‘ how to power on transmitter, p.6 ) 4.
Your value-added selection 3e 3. If indicator turns to red… it means power low, please replace batteries IMMD. RECEIVER… 1. If indicator is off… Please check if no power supply or fuse is fused. 2. If indicator turns to red and blinking un-regularly… It means an interruption occurred by unidentified signal , please contact with your supplier IMMD. 3. If indicator turns to red and blinking un-regularly ( blinking slowly, 1 times per sec.
Hercules Dimension Layout 230mm 155mm 175mm 10
Hercules Installation Wiring Diagram by 3-Elite 11
HERCULES A5-PROP Installation Wiring Diagram 13 14 21 15 16 21 JP1 J5-U J5-D J5-COM J6-U J6-D J5-COM 1 2 21 JP2 ANG-1 ANG-2 ANG-3 ANG-4 ANG-5 3 4 21 5 6 21 GND VR4 VR3 9 10 21 VR2 VR1 Max value 11 12 21 Inverter Proportional voltage output board JP11 K3 K4 COMMON JP12 K3 K2 K4 K13 K13 COMMON FUSE 5A JP5 25 24 23 22 AC-110V AC-220V K5 K5 K6 FUSE 0.
Our duty is ensure your safety, so you can rely on an excellent device Limited One Year Warranty The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was purchased from 3-Elite or authorized dealer. This warranty does not cover equipment which has been abused or damaged by careless handling or shipping, OR damaged by nature disaster such as earthquake, typhoon …etc.