OPERATION GUIDE Industrial Radio Remote Controller Nov 2004
Our duty is ensure your safety, so you can rely on an excellent device English Version TABLE OF CONTENTS INTRODUCTION .......................................................................................................................................3 MODEL OPTIONS ..................................................................................................................... 3 TECHNICAL SPECIFICATIONS ................................................................................................
Our duty is ensure your safety, so you can rely on an excellent device Introduction ☺ To satisfy various requests in remote controller, we are now finally researched a high quality, industrial grade remote controller --- APOLLO system.
Our duty is ensure your safety, so you can rely on an excellent device Technical Specifications ☺ Take dual-security design, equipment protected thoroughly, every output will automatically break when CPU out of work. Take common mode non-earth ground EMI noise-rejection circuit, which can against receiver malfunction occurred by operator’s error connection, also releasing the installation complex. Transmitter Receiver Frequency range: 300 MHz ( 20 channels ) – for Asian.
Our duty is ensure your safety, so you can rely on an excellent device (h) Fix the wired pendant in safe position. Mounted receiver in a firmed site where the dual color LED can be seen Take 4pcs of 8mm tap screws, screw tightly by electronic tools. caution ( fig. 1 ) ( example for fix / install receiver ) (a) Ensure the output contact as Main / A / B/ C / D / E/ F / G / H can not over 5A Wiring diagram after page 18 ).
Our duty is ensure your safety, so you can rely on an excellent device EMS-stop push button Power-on key ( fig. 2 ) Special push button E, G, I, K : Press to start-up Function Setting : ☺ APOLLO system has complete setting software, which accepts different requests from customers. An extra Function Kit may be needed for custom-made settings. ( See fig. 3 ) NOTE: 1) The function setting program is only operated under Window 98 Version.
Our duty is ensure your safety, so you can rely on an excellent device 3) 3 Speed – Pushbutton A and B will share their 2nd step relay to apply as the 2nd/3rd relay , i.e. A2 relay for 2nd step relay, B2 is for 3rd step replay. The above pushbuttons can also be set independently for the following functions : 1) Normal – Normal function, press button and RELAY is on, release button is off.
Our duty is ensure your safety, so you can rely on an excellent device ( fig. 5 ) APOLLO Function Switch for Multi-Hoists: Function: A, B or A+B hoist function switch. Operation: -press button A, then corresponded relay A will keep hold ( for hoist A , relay B will release. Press button B, then corresponded relay B will keep hold ( for hoist B ), relay A will release. Press button A and B together, then corresponded relay A and B both will keep hold.
Our duty is ensure your safety, so you can rely on an excellent device Function : A or B or C or D hoist function switch. Operation: Press button A or B or C or D, then corresponded relay A or B or C or D will keep hold.
Our duty is ensure your safety, so you can rely on an excellent device Status Indicator of Receiver ☺ APOLLO receiver has a dual-color indicator, GREEN for POWER, RED for SQ*. And the dual-color indicator ( green/red ) also shows various status as follows: Stand-by both green and red indicator light is ON. operation green indicator light is ON, SQ ( red light ) is off. Power off both green and red light is OFF. SQ Red light blinking slowly ( 1 time/sec. ) SQ Red light blinking fast ( 3 times/sec.
Our duty is ensure your safety, so you can rely on an excellent device ID Label ☺ Every APOLLO system has its identification PC label, which defines the device’s type, ID, service number, frequency and channel. For any inquiry please advise your supplier the service number for a faster solution. Type Channel / ID Service No. Frequency FCC ID: PCSAPOLLO11282004 Transmitter ID label ( fig. 6 ) receiver ID label ( fig. 7 ) Spare Parts Photo ☺ ( C1-6PB ) BOX.
Our duty is ensure your safety, so you can rely on an excellent device Trouble shooting ☺ We have come across problems that are not associated with wireless remote control unit but are crane/hoist or the device is subjected to control. Therefore it is essential that before trouble shooting, the problem is identified to be relating the wireless remote control unit.
Our duty is ensure your safety, so you can rely on an excellent device IF: F2* fuse has not been burn… Possibility: The power input has some problems. Check if the input voltage is correct, if the input voltage has no problem, find out the reason of abnormal voltage, or contact your supplier. IF: The indicator of output Main contact has light, but its relay has no output… Possibility: The fuse of Main contact, F1 is broken. Renew another 5A fuse. Over 5A contact relay source AC220 Caution Ext.
Apollo System- Transmitter ( TX ) General trouble shooting NOTE: Please make certain the following status before trouble shooting. (1) The hoist/crane or device is subject to control works (2) The TX outlook is in good condition without any leakage (3) Receiver works. If TX green indicator light is blinking 1 time every 4 sec.
Apollo System- Receiver ( RX ) General trouble shooting NOTE: Please make certain the following status before trouble shooting: (1) The crane or device being subject to control works. (2) The RX outlook is in good condition without any leakage (3) Transmitter works.
Our duty is ensure your safety, so you can rely on an excellent device APOLLO Transmitter Dimension IP65 4PB 6PB 8PB 10PB 12PB L1 188.5 215 240.5 267 292.5 L2 227.5 254 279.5 306 331.5 2H 26.5 4H 52 APOLLO Box.1/Box.2 Receiver Dimension 12 Box.1 Box.2 Box.1 For :P700,C1-4PB,C1-6PB,C1-8PB,C2-4PB, C211 Box.2 For: C1-10PB,C1-12PB,C2-6PB,C2-8PB,C2-10PB,C2-12PB Box.1: IP65 Box.
Our duty is ensure your safety, so you can rely on an excellent device Apollo System Installation Wiring Diagrams Remarks: For standard models only Custom-made is available on demand
Our duty is ensure your safety, so you can rely on an excellent device APOLLO C2-8PB Installation Wiring Diagram 11 12 21 17 18 21 COMMON L3 L4 COMMON Jp22 L5 L5 L6 COMMON Jp23 L7 COMMON COMMON JP13 K7 7 21 8 21 L6 JP12 K5 K6 5 6 21 L4 JP11 K3 K4 3 4 21 L2 JP21 L3 COMMON K2 K4 K13 COMMON Jp24 25 24 23 22 AC-110V AC-220V AC-380V K5 K6 K8 JP14 K14 L7 L8 JP5 K7 COMMON K8 COMMON K3 FUSE 0.
Our duty is ensure your safety, so you can rely on an excellent device Limited One Year Warranty The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was purchased from 3-Elite or authorized dealer. This warranty does not cover equipment which has been abused or damaged by careless handling or shipping, OR damaged by nature disaster such as earthquake, typhoon …etc.
