PRINTER'S INSTRUCTIONS: FINGERTIP GUIDE, EdgeE PANEL - P/N 10025595 Rev-X4, BLACK, 20LB MEAD BOND, 8.5” x 5.5”, TOL. +/- 0.
Contents ® Welcome to the 2GIG Edge Security Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Welcome to the 2GIG® Edge Security Panel This Quick Reference guide shows system owners how to use the basic features of the 2GIG Edge Security Panel. For more in-depth information, download the Edge User Guide from 2gig.com/dealers or visit http://www.2gig.com. About this Guide This guide is designed for use by home and business owners of the 2GIG Edge Security Panel from Nortek Security & Control LLC.
Panel LED Behavior The Edge panel has a single LED light on top right corner. It's a multi-color LED that will flash Blue, White and Red, depending on the panel's status.
Home Screen To wake the touchscreen, tap any area of the screen display. The touchscreen goes into sleep mode after two (2) minutes of inactivity. To change this setting to between 30 seconds and 10 minutes, access the Screen option in the Settings menu ( ) and then change the Screen Timeout setting. See System Settings, next page. System Status: Reveals the system state: Ready to Arm, Not Ready to Arm, etc. Date/Time: Shows the system date/time.
System Settings The Settings Icon is located at the bottom/right of the display. Tap for Settings Menu. Choose an option. Enter your code. Emergency Button/Indicator Announce an emergency event by manually activating the alarm at the control Panel. This button is available on most displays (other than some system setup menus) for access to Panic, Fire or Emergency alarms. See Emergency Alarms, page 20. Tap for Emergency Menu.
Smart Home Options The Smart Home button is located on the main display. When selected, the Smart Home options menu is displayed. Tap the Smart Home option. Choose a Smart Home option. Home Button/Indicator The Home button is located at the bottom/ right of most displays. When selected, you’ll return to the Home screen. Return to the Home screen.
System Icons The status bar that appears on the top of the Home screen and on most system menus reveals a variety of icons providing system information and access to different functions.
Burglary Protection Arm the System (Armed Stay Mode) Apply this mode when people and/or pets will be staying inside. Perimeter zones (doors and windows) are armed, leaving the interior zones (motion detectors) disarmed. Ensure the Edge Panel is in the Ready to Arm state. Tap Arm Stay. Silence option extends the length of the timer and silences the audible countdown. Following countdown, the system is armed. Quick Exit button allows time to exit the premises without having to disarm the system first.
Arm the System (Away Mode) Apply this mode when all people and pets will be leaving the premises. Both the perimeter zones (doors and windows) and the interior zones (motion detectors) are armed. Ensure the Edge Panel is in the Ready to Arm state. Silence option extends the length of the timer and silences the audible countdown. Tap Arm Stay. Tap the Mute ( ) button below Arm Stay, Arm Away, Quick Exit or Disarm to silence audible prompts.
Arm the System (Using the Alarm.com mobile app) When the system is disarmed, the Disarmed screen ( ) is displayed. To disarm the system with the Alarm.com mobile app: At the Disarmed screen, tap Disarmed. The app initiates the Arming process. ARMED (STAY/AWAY) is displayed with a red icon ( 11 ).
Bypass Sensors When you open a protected door or window, the Not Ready to Arm message appears and reveals the zone in YELLOW on the Sensors Not Ready list. Before you can arm the system, place the system into the Ready to Arm state by (1) walking to the sensor and closing it, or (2) bypassing the sensor(s). Number of bypassed sensors. Tap to return to the Bypass screen. Tap the Bypass All button. 1. Enable the Bypass option(s) to bypass selected sensors. 2.
Disarm the System (Armed Stay Mode) When the system is armed in Armed (Stay) Mode, the Armed (Stay) screen is displayed. Enter your code to disarm the system.
Disarm the System (Armed Away Mode) When the system is armed in Armed (Away) Mode, the Armed (Away) screen is displayed. Enter your code to disarm the system. TIP: If a false burglary alarm is activated while the system is armed (for example, someone inadvertently opens a protected door/ window) and you want to cancel or silence the alarm, see “If You Want to Cancel/Silence a False Burglary Alarm “ on page 17.
Disarm the System (Face Recognition Mode) When the system is armed is Armed, the Armed (Stay or Away) screen is displayed. To disarm the system with Face Recognition: 1. Align your face within the frame of the camera. If you're a registered User, the system will analyze your face and disarm. OR 2. Press the Keypad button to access the keypad and disarm using your code.
Disarm the System (Using the Alarm.com mobile app) When the system is armed, the Armed (Stay or Away) ( ) screen is displayed. To disarm the system with the Alarm.com mobile app: Tap the Armed button. Copyright © 2020 Nortek Security & Control LLC Tap Disarm. The app initiates the Disarming process. 16 DISARMED displayed with a green icon ( ).
Using the Duress Code To transmit a user duress report to the Central Station (for example, being held by an unwanted intruder against your will), use the steps below to input your system’s unique Duress Code. The Central Station is notified that you are in a duress situation. The intruder will be unaware that you have contacted your provider for assistance. For added security, disable Bluetooth Disarming and Face Recognition options in Bluetooth Settings (see page 27).
In the Event of a Burglary Alarm Sensor Type Action Default Time Setting Instant Sensor Alarm siren immediately sounds and continues to sound until a User Code is entered or for the amount of time specified by the Burglary Bell Cutoff Time setting Four (4) minutes. Delayed Sensor Countdown allows time to disarm the system before the siren sounds. Siren continues to sound until a User Code is entered or until the amount of time specified by the Burglary Bell Cutoff Time setting.
Fire and Emergency Protection Smoke and Carbon Monoxide (CO) detectors may be installed to protect the occupants of the dwelling from harmful, and possibly deadly effects of smoke, heat, and fire-related dangers. The system’s fire and emergency protection features are always protecting the premises. See Warnings, page 34. NOTE: A professional installer must ensure that all Smoke/Heat alarms and CO detectors are installed in compliance with all national, regional, and local laws, statutes, and guidelines.
Emergency Alarms You can notify the Central Station of an emergency event by manually activating the alarm at the control Panel. The Alarm button is designed with a double-action trigger. This reduces the risk of inadvertently transmitting a false alarm to the Central Station. To activate a manual alarm: Tap for Emergency alarms. Copyright © 2020 Nortek Security & Control LLC Press and hold for 2 seconds.
Deactivating an Emergency Alarm The panel appears red at the top of screen during an Emergency Alarm. To deactivate a manual alarm: The active alarm will be displayed. Tap Clear Alarm History to deactivate the alarm. Align your face within the frame of the camera. If you're a registered User, the system will analyze your face and set the Alarm. You can also press the Keypad button to access the keypad and deactivate the alarm using your code.
Security Codes The system supports a total of 101 unique security codes, which includes the types of security codes detailed below and one (1) Installer Code which is reserved for use by 2GIG alarm dealers and their professional installers. See Change the Master User or Duress Code, next page. Types of Security Codes Description Default Code One (1) Master User Code is available for accessing the System Settings and other PIN-protected features.
Change the Master User or Duress Code The Master User Code provides users with the ability to access the System Settings menu and, depending on your system configuration, provide access to other pin-protected features. The Duress code lets users send a silent duress report to the Central Station. See If You Need to Use the Duress Code on page 16. IMPORTANT: When customizing codes for your system, it's best not use the dwelling’s physical address, telephone digits, birth dates or birth years.
Edit a User Code Once a user has been created, you can adjust that users access to the system or individual areas. At the Users screen, tap the pencil icon ( Copyright © 2020 Nortek Security & Control LLC ). Tap the arrow (>) adjacent to the Access Code. 24 At the Enter the user's access code screen, input a unique code and tap Next. Then, confirm the code and tap Done.
Face Recognition Setup At the User's screen, you can edit Users to include the panel's Face Recognition feature. Tap System Settings ( ), enter the system’s Master User Code and then tap the Users ( ) icon. Next, continue with these steps: 1. At the Users screen, tap the pencil icon ( next to a User. ) 2. Tap the switch adjacent to the Facial Recognition option to set it to Active. 25 3. Read the Biometric Information Privacy Policy and Consent form, use your finger to scroll down then tap I Agree.
4. On-screen instructions guide you through the process of capturing your profile. 5. Steps 2 through 5 will instruct you to slightly move your head in four specific directions to complete the face recognition process. 6. Tap the activation switch adjacent to the Recognition Modes you'd like to use with Face Recognition, then tap NEXT. 7. Your selections and profile status are summarized. ) if you'd like to edit. Tap the pencil icon ( Press the back button ( previous menus.
Bluetooth Setup You can setup the control panel to connect with your smart phone for Bluetooth Disarming. Tap System Settings ( ), enter the system’s Master User Code, and then tap the Users ( 1. At the Users screen, tap the pencil icon ( ). ) icon. Next, continue with these steps: 2. Scroll down to the Bluetooth Disarming option, then tap the adjacent switch to the "Active" setting. 27 3. At the Enter the user's access code screen, input a unique code and tap Next. Confirm the code, and tap Done.
Bluetooth Setup (continued) 4. Tap PAIR DEVICE. 5. Once paired, tap OK. Copyright © 2020 Nortek Security & Control LLC 6. Enter your pairing code from your smart phone. 28 7. Your device is paired. Press the back button ( ) to return to the previous menus.
Smart Areas Settings Smart Areas allow homeowners to create up to four independently controllable and manageable areas (For example: Main House, Garage, Room Rental, etc). Flexible user interface limits control of the Smart Areas at the user code level. Note: Smart Areas must be enabled to view the Smart Areas tile on the home screen. For more details, refer to the Edge Users Guide and consult your alarm dealer. To set Smart Areas settings: 1. At the Home screen, tap the Settings icon ( ). 2.
Smart Areas Settings (continued) 4. Tap the arrow (>) adjacent to a Smart Areas option. Copyright © 2020 Nortek Security & Control LLC 5. Enter a name for the new Smart Area, then select SAVE. 30 6. Repeat the naming process for all new Smart Areas.
View Smart Areas View and change state of Smart Areas. Note: Smart Areas must be enabled to view the Smart Areas tile on the home screen. For more details, refer to the Edge Users Guide, or consult your alarm dealer to enable Smart Area. At the Home screen, tap the Smart Area icon ( ). Enter your code to view the Settings options. Smart Areas status is displayed. Smart Areas Status Home : Armed (STAY). Garage: Disarmed with Bypassed Zones. Rental : Disarmed. Safe : Disabled.
Wireless Network Settings To set wireless network settings: 1. At the Home screen, tap the Settings icon ( ). 2. Enter your code to view the Settings options. 4. Tap the Wireless Option. 5. Choose your Wireless Network name. Copyright © 2020 Nortek Security & Control LLC 32 3. Tap the Nework option. 6. Type in your Network Password. Once you're successfully connected, press the back button ( ) to return to the previous menus.
Set Sensor Chimes To set individual chimes for each zone use the sensor chime menu: 1. At the Home screen, tap the Settings icon ( ). 4. Select a sensor. 2. Enter your code to view the Settings options. 3. Scroll down, then tap the Smart Areas Settings option. 5. Tap the new setting. 6. Press the back button ( to the previous menus.
System Tests To ensure continued protection and proper system operations, it is important to perform a sensor and console test on a weekly basis. Tap the Settings icon ( ), then enter your Master User Code when prompted. Tap the System Tests option. Tap a buttons to choose the test type (for example): Sensor Test: Tests signals between the Control Panel and installed sensors. Panel Test: Tests the function of the Edge Panel’s audio and buttons.
Limited Warranty This product is warranted against defects in material and workmanship for two (2) years. The battery is limited to One (1) year. This warranty extends only to wholesale customers who buy directly from Nortek Security & Control LLC or through Nortek Security & Control’s normal distribution channels. Nortek Security & Control LLC does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any.
WARNINGS Limitations of Alarm Products This product should be tested periodically to make sure it is working properly. The product, if used properly, may reduce the risk of burglary, robbery, and other adverse events that have the potential to result in injury or loss of life; however, Nortek Security & Control is not an insurer. This product is neither insurance nor a guarantee that such an event will be prevented, and users should protect themselves with proper insurance.
PRINTER’S INSTRUCTIONS: INSTALLER QUICK START GUIDE,2GIG-EDG-NA: P/N 10029907 Rev-X2, INK: BLACK, 20LB. MEAD BOND, TOL. +/- 0.125", SCALE: 1:1, FRONT & BACK,11"x17" PAGES: 2, FOLDING: FINISH SIZE - 8.5”x5.
Installer Toolbox The Installer Toolbox is password-protected. To use this feature, you must enter an Installer Code. The factory default code is 1561. To access the Installer Toolbox: Panel Programming – Built-In Zones You can program up to three (3) Built-In Zones per system. To get started, navigate to the Installer Toolbox. Tap Panel Programming, then tap the Built-In Zones option. Selecting a Built-In Zone 1. Tap the Settings icon ( 2. Tap KEYPAD. ). Left side of screen: Select a Wireled Zone [#].
PRINTER’S INSTRUCTIONS REGULATORY INSERT, 2GIG-EDG-NA - P/N: 10026358 Rev-X6 - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.5X11”, TOL. +/- 0.125, SCALE: 1:1, FRONT & BACK, FOLD ONCE TO 5.5 x 8.
Instructions 8 – GND 2.2K 2.2K 9 – 14VDC+ 7 – DCOUT 10 – 14VDC- 6 – GND 11 – OCL1 5 – BELL+ 12 – OCL2 4 – BELL- 13 – TX 3 – ZONE1 14 – RX 1K 1K 2 – ZONE2 1 – GND 1. Please test the system at least once per week. 2. Replacement rechargeable battery is 2GIG-EDG-BATT. Replacement batteries are available and are expected to last a minimum of three years under normal conditions. 3. This unit is to be checked by a qualified technician at least once every 3 years. 4.
