MagBak Wireless Charger Read this manual carefully before using this product. Also, refer to the manual of the device that will be used with this product to check for compatibility.
Product Name MagBak Wireless Charger Model MBQI-750 (FCC ID:2AT9GMBQI750) Size ≈ 54 x 14 x 72 (mm) Weight 70g (2.47oz) Input 5V Charging Distance 2 - 6 (mm) 2A, 9V 1.8A The charging distance is the optimum distance between the wireless charger induction coil and the device receiver coil. The distance between coils should not exceed 12 mm. Note that the wall of the wireless charger has a thickness of 1.2 mm.
Compatibility Compatible with devices that support the Qi interface wireless charging standard.
Instructions Use the supplied USB C cable to plug Wireless Charger to a USB power adapter. IMPORTANT: For fast charging use a power adapter that can supply 9V 1.8A. Select fan operation mode. OFF: Fan will always stay off, even during charging. This will make the charger silent, but charging speed may be throttled to prevent overheating. AUTO: Allows fan to turn on automatically when a device is being charged.
When fan is set to AUTO, ensure that the fan intake and exhaust are clear of any obstruction. Mount the Wireless Charger to MagStick for a secure hold on a car's dashboard or other surfaces. *MagSticks not included.
Use with the MagBak Case to mount and charge your phone. See www.1lss.com/charger for a list of supported MagBak Cases. The embedded magnets in the case auto-align with the magnets in the charger for optimized charging speeds.
The charger allows you to mount your phone in Portrait and Landscape modes. Portrait Mounting Landscape Mounting Phone mounting on Charger on MagStick.
⚠ Notes 1. The Wireless Charger is designed to work with MagBak Case and the MagStache mounting system (not required for operation). Refer to www.1lss.com/charger for a list of supported MagBak Case models. 2. For best performance, use the Wireless Charger with a USB power adapter that can provide 9V 1.8 A. 3. Before attempting to use the Wireless Charger, ensure that it is securely fastened to the vehicle's dashboard or supported magnetic adapter. 4.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Intellijel Designs, Inc. could void the user’s authority to operate the equipment.
