All product with the Easy Chime Logo work together 1byone Products Inc. 1230 E Belmont Street, Ontario, CA, USA 91761 Customer Service: +1 909-391-3888 www.1byone.
Thanks for purchasing 1byone Wireless PIR Alert Doorbell. Please read this instruction manual before use to ensure safe operation. 1. Package Contents: 1 x Doorbell Receiver 2 x PIR sensors 2 x Wall plugs and 2 x Screws 1 x Instruction manual (10) (8) (9) (11) If any package contents are visibly damaged or missing, please immediately contact 1byone Support Center at https://www.1byone.com/Support for assistance. 1. LED indicator 2. Speaker 3. Sound and flash switch 4. Volume button 5.
. Power Supply: Doorbell receiver : Please plug into a power outlet (AC110-120V). PIR sensor: The PIR sensor is powered by 3x AAA batteries,please insert the battery using the following procedure: ·Remove the screw on the back of the PIR sensor with screwdriver. Next remove the battery compartment cover. ·Insert 3 x AAA batteries into the battery compartment, be sure using the correct polarity to eliminate the danger of fire. ·Replace the battery compartment cover and tighten the screw.
These are referred to as Sound, Flash, and Sound+ Flash mode. To select , switch the Sound and flash switch to one of the following position: Sound only mode Flash only mode Sound +Flash mode. B. Selecting the ringtone: There are 36 programmable ringtones to choose from. Press the Ringtone selector button to change the ringtone. Stop pressing this button when you reach the desired ringtone. C. Adjusting ringtone volume: VOL Press the Volume button 1/2/3 until the desired volume is set.
after 30 seconds, then re-pair the wanted PIR sensor. 5. Installation: For the receiver, plug in the receiver into any safe power outlet. For the PIR sensor, it can be mounted on a wall or just put it on a flat place. To mount on the wall: Drill holes on the wall. Next push the wall plug into the drilled holes, and then insert the screw into the wall plugs. Finally, mount the PIR sensor on the screw. Notes: ·The recommended installation height for the PIR sensor is 3.3-4.9ft (1.0-1.5m ).
. Trouble Shooting: a. The receiver rings without the PIR sensor being triggered. The receiver may be matching on the same frequency with nearby PIR sensor. you should wipe the pairing and re-pair your PIR sensors. also affect the receiver’s ringing. Avoid mounting the PIR sensor and receiver near any metal objects. b. There is no ring/LED flash when the PIR sensor is triggered. ·Check whether the battery (AAA batteries) is inserted in the PIR sensor.
Disposal Disposal of the appliance Under no circumstances should you dispose of the appliance in normal domestic waste. This product is subject to the provisions of European Directive 2012/19/EU. batteries are disposed of in a non-polluting manner. Only dispose of batteries when they are fully discharged. The appliance’s packaging is made from environmentally friendly material and can be disposed of at your local recycling plant.
Customer Service/Kundenservice Service Clients/Atención al cliente Assistenza Clienti/カスタマーサービス US To ensure speedy handling of your issue, please call or email us for assistance. Phone: +1 909-391-3888 (Mon-Fri 9:00am - 6:00pm PST) Email: ushelp@1byone.com UK To ensure speedy handling of your issue, please call or email us for assistance. Phone: +44 158 241 2681 (Mon-Fri 9:00am - 6:00pm UTC) Email: ukwebhelp@1byone.com CA To ensure speedy handling of your issue, please email us for assistance.